MUS+ Automatic User Manual
VIDEO
MANUAL
Turn the crown clockwise for around 30 times at position I.
Pull out the crown to position II and turn the crown counterclockwise to set the date.
Reminder: Do not set the date between 9:00 pm and 3:00 am, when the parts of the watch revolve with the calendar, as quick adjustment may damage internal gears and reduce service life.
Pull out the crown to position III and turn the crown counterclockwise to set the hour and minute hand.
After exposure to light for 30–60 minutes, the luminous material will emit light for approximately 30–35 minutes in darkness.
Reminder:
1. Place the dial facing upward to ensure effective light absorption.
2. Stronger light exposure results in better luminous performance; exposure to direct sunlight is recommended.
1. Release spring bars at the back by pushing the pin inward.
⚠ Spring bar is a small part, keep away from children and pets.
2. Replace the band.
3. Place one end of the spring bar into the lug hole, then insert spring bars by pushing the pin inward. Make sure the spring bars snap into the lug holes.
Move the buckle forward or backward to adjust the length. Attaching the clasp to the keeper completes the loop.
ADDITIONAL TIPS FOR SMALLER WRIST:
For smaller wrists, if the hook and clasp feel loose or insecure, adjust the case. To loosen, move the case away from the hook; to tighten, move it closer.
⮕ Full parachute strap tutorial
1. Release spring bars at the back by pushing the pin inward.
2. Replace the strap
3. Place one end of the spring bar into the lug hole, then insert spring bars by pushing the pin inward. Make sure the spring bars snap into the lug holes.
